Welcome!

This support forum is for customers of our ink and toner cartridges and refills.

Hide Intro

Dell 2335 / 2333 / 2350 Refill Instructions

on 4/1/20, 12:29 PM • 342 views

General Refilling Procedures:

1. First you need to locate the plastic SEALING PLUG similar to the one shown in this picture

to the right.

2. Once the plastic sealing plug is viewable, slowly and gently, pry the SEALING PLUG

away from the cartridge using a flat screwdriver – this reveals the filling hole.

3. Remove any toner left in the cartridge before refilling the cartridge.

4. Refill by pouring toner into the fill hole through the nozzle attached to the toner bottle.

5. Replace the plug when finished refilling

6. This cartridge has a MEMORY CHIP which needs to be replaced in order for the printer to

sense that there is toner in the cartridge. Simply pry the chip from the cartridge carefully,

and stick the new replacement chip in its place.

For full instructions and images see: www.uni-kit.com/support.htm

This is a support forum for ink and toner cartridges and refills. Read Guidelines

0 follower(s)